375.00 USD FS...CZ5 Tom tuned and calibrated to CZ-3D "old coins" mode Alamogordo

Published date: March 9, 2017
  • Location: Alamogordo, New Mexico, United States

I just bought a CTX and am going in a different direction now, my loss is your gain. The coil and the housing were inspected and are now running at factory specs. Comes with the 8" coil w/ coil cover
Also included is the printed owners manual and the book on the CZ detectors by Andy Sabisch. Everything is in excellent working condition and this machine should last many years to come. Asking $375. I prefer paypal friends and family or add 4% for regular paypal, shipping will be USPS priority mail.

Here is Tom checklist of what was performed by Tom:



> > 1) 'Salt' balance was slightly out of alignment..... which affects the entire spectrum & calibration of the unit. Now..... it is 'per engineering design'.
> > 2) Deep target audio smear did not exist....... no correction needed.
> > 3) I boosted 'Salt' mode auto-tune/all-metal Sens a bit more.
> > 4) 'Salt' Nickel ID was very slightly out of spec's....... and is now per engineering design.
> > 5) 'Salt' Zinc ID was also very slightly out of spec's......... minor calibration performed.
> > 6) I stabilized the electronics to a greater level of stability.
> > 7) Grnd Bal internal set-point was slightly out of cal..... and is now in spec's.
> > 8) 'Normal' Nickel ID is now CZ-3D "old coins" spec's.
> > 9) 'Normal' Zinc ID is now CZ-3D "old coins" spec's.
> > 10) Internal electronics are exceptionally clean. This is a early 1997 unit.
> > 11) Unit was 10.6" on a clad dime in 'Normal' mode. Unit is now 11.0" on a clad dime in 'Normal' mode. This is with real-world (Florida) dirt.
> > 12) Audio boost circuitry was exacting ......... no calibration needed.
> > 13) I boosted 'Normal' mode auto-tune sensitivity a bit more.
> > 14) ID at depth is a fair amount better than engineering design requirements.
> > 15) Depth meter accuracy is 'CZ spec's exacting'.
> > 16) Pinpoint function per engineering design.
> > 17) Electronic stability is well above average.
> >
> > This CZ is a very typical/solid/reliable CZ-5 platform.......representing the entire/exacting intent for this platform. Nice to see!!

Share

Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings

  • FS...Minelab Etrac w/ warranty until Aug 2018
    FS...Minelab Etrac w/ warranty until Aug 2018
    Metal Detectors - Alamogordo (New Mexico) - March 6, 2017 940.00 USD

    I'm selling my trusty Etrac because I've upgraded to the CTX, the warranty is good until Aug 2018. I have taken extreme care of this machine and it comes with some nice extras. First, it is being sold with a SEF 10x12 coil instead of the stock coil, ...

  • FS...CZ5 Tom tuned and calibrated to CZ-3D "old coins" mode
    FS...CZ5 Tom tuned and calibrated to CZ-3D "old coins" mode
    Metal Detectors - Alamogordo (New Mexico) - March 2, 2017 400.00 USD

    I am selling a very clean and freshly tuned CZ5 with the 8" coil and cover. I just got this back from Tom Dankowski after he inspected and retuned and calibrated it. He also performed the "upgrade" to the CZ-3D "old coins" platform. The CZ machines h...

  • FS...CZ5 Tom tuned and calibrated to CZ-3D "old coins" mode
    FS...CZ5 Tom tuned and calibrated to CZ-3D "old coins" mode
    Metal Detectors - Alamogordo (New Mexico) - February 28, 2017 610.00 USD

    I am selling a very clean and freshly tuned CZ5 with the 8" coil and cover. I just got this back from Tom Dankowski after he inspected and retuned and calibrated it. He also performed the "upgrade" to the CZ-3D "old coins" platform. The CZ machines h...