1195.00 USD Great Minelab Etrac package with extra coils and accessories Saint Petersburg

The warranty ended on Nov 2014, so out of warranty. I have taken very good care of this detector. Has always had a protector protective cover on both the battery / grip part of the detector and the main control box.

As you can see in one of the pictures,the Minelab logo has worn a bit from use even with the cover having always been on the detector.
The screen of the control box is excellent, no marks, having been always covered with a Zagg shield. I just put another new shield on the machine a couple months ago.There are a couple of tiny bubbles in the Zagg from installation.

There are some very slight marks on many of the lower shafts that are included with the detector from field use.

The detector comes with both the original upper shaft, which also has some usage marks. Also - a a Sunray probe already mounted to an upper shaft. As you may know, Sunray no longer makes these probes, thus they are a rarity. I had to wrap some rubber tape , then I covered it with quality electrical tape before the connector that connects to the detector becauses the outer black insulation was beginning to pull out of the connector. I talked to Ralph at Sunray and to replace the outer black insulation completely was just prohibitively expensive because of the way the probe is designed. The red cap is somewhat worn from use but that is easily replaced through any Sunray dealer. The Sunray upper shaft has some spots where the paint has worn off under the plastic bands that hold the probe to the shaft. You can see this in one of the pictures.I am including a nice liitle cover for the Sunray control switch box.The probe itself works great,

The detector comes with these coils and each coil has its own lower shaft and hardware:

1. The original Etrac coil that came with the detector

2. White Detech 13" Ultimate Coil . The coil shows some field wear due to its color..

3. Detech SEF WSS 10x5 coil

4. Detech 4.5 x 7 DD Excellerator Coil

5. Sunray Stealth X - 5. The decal came off of this coil. You can get another decal from Sunray on your own if you so desire.

6. Coiltek Joey coil. The original orange one. Coiltek uses white tape to keep the coil cover on and the tape has gotten stained from field use. I have included a roll of orange duct tape should you want to replace.

I am very experienced with the Etrac and these coils I found were the very best for the machine.
You will be covered for every contingency with this array of coils. All coils come with coil covers and are in excellent shape.

I am also including an RNB 2900 rechargable battery with this machine. This battery is amazing and lasts a very long time before it needs to be recharged. You will never need to buy conventional batteries again for this machine.

The original Minelab rechargable battery and adaptor is also included, but you won't want to use it after you start using the RNB...

I do not have the conventional minelab battery holder anymore.

I am also giving you a pair of Sunray Pro Gold headphones,

The original Koss headphones will also come with the machine. They have never been taken out of the plastic.

You will also get the Minelab pro Swing 45 bungee harness. It has seen field use but is still in very good shape. I have cleaned it well before sending out to the lucky buyer. I had to glue one of the plastic supports with Gorilla Glue when I first got the harness because it came out of its holder in the harness. It was too much hassle to send back to Minelab...You can see this in the picture.

There is the original arm cuff , which has never been used and also a quality Jeff Herke armcuff which was put on the machine since the beginning. There is also a nice padded cover for the Herke armcuff that I bought. You will have to get some more velcro to attach this padded cover to the Herke armcuff.

I have also included black nylon drawstring storage bags for every coil and a nice headphone bag for the Sunray's as well.

Included is a Sunray protective cover for the control,box which I think fits the best of all the ones I have so far seen out there. There is also another cover with a slightly looser fit included as well.

The original manual will also be included, as well as Andy Sabisch's Minelab Explorer and Etrac book.

So thats it. This is a very nice Etrac setup.This Etrac is at least an 8.5 out of 10. Everything you will need. The machine is great and I have found many old coins, many of them silver, and other valuable with her. This detector has been very well taken care of and has many, many years of adventures to go.


These items will only be sold in this package. Do not ask me to break it up and sell any items individually because I will not .My price is more than fair for all that you will get. No money orders or checks. No trades. No sales outside of the USA. Paypal payment only. Price includes Fed Ex home delivery signature required.

Share